بسم اهلل الرحمن الرحیم
خالصه
در این مقاله تمامی عناوین استاندارد
NFPAبه فارسی ترجمه گردیده و نحوه
مطالعه این استانداردها بیان شده است ،در
انتها لینک دانلود تمامی این استانداردها
برای شما عزیزان قرار داده شده است تا
تمامی شما سروران گرامی نیز از این گنجینه
نفیس بهرهمند شوید.
گرد آورندگان
سید محمد حسینی
منصور مهدیزاده
(هرگونه کپی برداری بدون ذکر منبع مجاز نمیباشد)
(برای دانلود این مقاله به سایت ما مراجعه نمایید یا بر روی این صفحه کلیک نمایید)
IMPORTANT NOTICES AND DISClAIMERS CONCERNING NFPA ® STANDARDS
®
NFPA codes, standards, recommended practices, and guides ("NFPA Standards"), of which the document
contained herein is one, are developed through a consensus standards development process approved by the
AmericanNational Standards Institute. This process brings together volunteers representing varied viewpoints
and interests to achieve consensus on fire and other safety issues. While theNFPA administers the process and
establishes rules to promote fairness in the development of consensus, it docs not independently test, evaluate, or
verify the accuracy of any information or the soundness of any judgments contained inNFPA Standards.
The NFPA disclaims liability for any personal injury, property, or other damages of any nature whatsoever,
whether special, indirect, consequential or compensatory, directly or indirectly resulting from the publication, use
of, or reliance onNFPA Standards. TheNFPA also makes no guaranty or warranty as to the accuracy or
completeness of any information published herein.
In issuing and makingNFPA Standards available, theNFPA is not undertaking to render professional or other
services for or on behalf of any person or entity. Nor is theNFPA undertaking to perform any duty owed by any
person or entity to someone else. Anyone using this document should rely on his or her own independent
judgment or, as appropriate, seck the advice of a competent professional in determining the exercise of
reasonable care in any given circumstances.
TheNFPA has no power, nor does it undertake, to police or enforce compliance with the contents ofNFPA
Standards.Nor docs theNFPA list, certify, test, or inspect products, designs, or installations for compliance with
this document. Any certification or other statement of compliance with the requirements of this document shall
not be attribmable to theNFPA and is solely the responsibility of the certifier or maker of the statement.
REMINDER: UPDATING OF NFPA STANDARDS
Users ofNFPA codes, standards, recommended practices, and guides ("NFPA Standards") should be
aware that these documents may be superseded at any time by the issuance of a new edition, may be
amended with the issuance of Tentative Interim Amendments (TIAs), or be corrected by Errata. It is
intended that through regular revisions and amendments, participants in theNFPA standards
development process consider the then-current and available information on incidents, materials,
technologies, innovations, and methods as these develop over time and thatNFPA Standards reflect
this consideration. Therefore, any previous edition of this document no longer represents the current
NFPA Standard on the subject matter addressed. NFPA encourages the use of the most current edition
of any NFPA Standard [as it may be amended by TIA(s) or Errata] to take advantage of current
experience and understanding. An officialNFPA Standard at any point in time consists of the current
edition of the document, including any issued TIAs and Errata then in effect.
To determine whether anNFPA Standard has been amended through the issuance of TIAs or
corrected by Errata, visit the "Codes & Standards" section at www.nfpa.org.
ISBN: 978-145592811-8 (Print)
ADDITIONAL IMPORTANT NOTICES AND DISCLAIMERS CONCERNING NFPA ® STANDARDS
Updating of NFPA Standards
Users of NFPA codes, standards, recommended practices, and guides ("NFPA Standards") should be aware that these
document� may be superseded at any time by the issuance of a new edition, may be amended with the issuance of Tentative
Interim Amendments (TIAs), or be co1-rected by En·ata. It is intended that through regular revisions and amendments,
participants in the NFPA standards development process consider the then-current and available information on incidents,
materials, technologies, innovations, and methods as these develop over time and that NFPA Standards reflect this
consideration. Therefore, any previous edition of this document no longer represents the current NFPA Standard on the
subject matter addressed. NFPA encourages the use of the most current edition of any NFPA Standard [as it may be amended
by TIA(s) or Erratal to take advantage of current experience and understanding. An official NFPA Standard at any point in
time consists of the current edition of the docwnent, including any issued TIAs and Errata then in effect.
To determine whether an NFPA Standard has been amended through the issuance ofTIAs or corrected by Erra
...
--------------------------------------
...f Testing, 13.13
Use and Limitations, 13.2
Definition, 3.3.21
Local Application Systems, Chap. 8
Minimum Design Quantity (MDQ)
Clean Agent Requirements, 8.3
Definition, 3.3.28
Description, 8.1
Minimum Design Temperature
General Requirements, 8.1.2
Safety Requirements, 8. 1.3, A.8.1.3
Definition, 3.3.29
Uses, 8.1.1
-N-
Hazard Specifications, 8.2
No Observed Adverse Effect Level (NOAEL)
Extent of Hazard, 8.2.1
Location of Hazard, 8.2.2
Definition, 3.3.30
Location and Number of Nozzles, 8. 5
Normally Occupied Enclosure or Space
Nozzles, 8.4
Discharge Time, 8.4.3
Normally Unoccupied Enclosure or Space
.
Nozzle Discharge Rates, 8.4.2
Definition, 3.3.31, A.3.3.31
Definition, 3.3.32
-0-
Nozzle Selection, 8.4.1
Lockout Valve
Definition, 3.3.22
Lowest Observable Adverse Effect Level (LOAEL)
Definition, 3.3.23
2022 Edition
Occupiable Enclosure or Space
Definition, 3.3.33
2001-149
INDEX
-P-
System Design, Chap. 6
Specifications, Plans, and Approvals, 6.1
Pre-Engineered System
Approval of Plans, 6. 1.3
Definition, 3.3.34
Specifications, 6.1.1
Pump Room
Working Plans, 6.1.2
Definition, 3.3.35
Flow Calculations, 6.1.2.8
-R-
System Flow Calculations, 6.2, A.6.2
Recovered Agent
-T-
Definition, 3.3.36
Total Flooding
Recycled Agent
Definition, 3.3.43
Definition, 3.3.37
Referenced Publications, Chap. 2
Total Flooding System
Definition, 3.3.44
-SSafety Factor (SF)
Definition, 3.3.38
Sea Level Equivalent of Agent
Definition, 3.3.39
Sea Level Equivalent of Oxygen
Definition, 3.3.40
Service
Definition, 3.3.41
Total Flooding Systems, Chap. 7
Design Concenu·ation Requirements, 7.2
Flame E.xtinguishment, 7.2.2
Class A Hazards, 7.2.2.1
Class B Hazards, 7.2.2.2
Cla�s C Hazards, 7.2.2.4
Listing Program, 7.2.2.3, A.7.2.2.3
General, 7.2.1
lnerting, 7.2.3
Disu·ibution System, 7.5
Shall
Definition, 3.2.4
Extended Discharge, 7.5.2, A. 7.5.2
Initial Discharge Time, 7.5.1, A.7.5.1
Should
Definition, 3.2.5
Duration of Protection, 7.4, A.7.4
Standard
Definition, 3.2.6
Enclosure, 7.1, A.7.1
Storage Con tamers for Vaporizing-liquid Agents, Annex F
Total Flooding Quantity, 7.3
Agent Properties, F.2
HFC-125 Properties, F.2.1
HFC-125: Henry's Law Consram for Nitrogen
Solubility, F.2.l.2
HFC-125: Nitrogen Required for Cylinder Pressurization
at Temperature and Fill Density, F.2.1.3
HFC-125: Vapor Pressure and Liquid Density, F.2.L l
HFC-227ea Properties, F.2.2
HFC-227ea: Henry's L'lw Constant for Nitrogen
Solubility, F.2.2.2
HFC-227ea: Nitrogen Required for Cylinder
Pressurization at Temperature and Fill
Density, F.2.2.3
HFC-227ea: Vapor Pressure and Liquid Density, F.2.2.l
Introduction, F.1
Nozzle Choice and Location, 7.6
Design Factors, 7.3.3, A.7.3.3
Additional Design Factors, 7.3.3.2, A.7.3.3.2
Design Factor for Enclosure Pressure, 7.3.3.3, A.7.3.3.3
Tee Design Factor, 7.3.3.1, A.7.3.3.1
Toxicological and Physiological Effects of Clean Agents and Their
Decomposition Products, Annex B
Halocarbon Agents, B.1
Toxicological Effects of Halocarbon Agents, B. L l
Toxicological Effects of Hydrogen Fluoride, B.l.2
Physiological Effects of Inert Gas Agents, B.2
-UUnoccupiable Enclosure or Space
Definition, 3.3.45
References, F.3
Superpressurization
Definition, 3.3.42
2022 Edition
ویدیو – انیمیشن های اطفا ،اعالم حریق ،تهویه وتخلیه دود (رایگان)
برای مشاهده هر یک از ویدیوهای زیر کافیست بر روی عنوان آن آموزش کلیک نمایید تا به صفحه
ویدیو و آموزش آن عنوان هدایت شوید.
انیمیشن ویدیو
اطفا حریق آبی
oسیستم اطفا لوله خشک اسپرینکلر
oسیستم اطفا لوله تر اسپرینکلر
oسیستم اطفا پیش عملگر
oسیستم اطفا واترمیست
oسیستم اطفا سیالبی
سیستم اطفا فوم
تجهیزات اطفا حریق -تجهیزات هشدار دهنده
تجهیزات اطفا حریق -اسپرینکلر
سیستم اطفا آشپزخانه صنعتی
سیستم اطفا آیروسل
سیستم اطفا دستی
سیستم اطفا گازی
oسیستم اطفا )FM200 , NOVEC, Inert Gas (IG
oسیستم اطفا CO2
سیستم تهویه و تخلیه دود
سیستم اعالم حریق
oآدرسپذیر
oمتعارف
آموزش استاندارد
آموزش استاندارد NFPA 13
آموزش استاندارد NFPA 14
آموزش استاندارد NFPA 20
آموزش نرمافزار
o
اتواسپرینک
o
پایروسیم
o
پثفایندر
دانلود استاندارد
o
ترجمه استاندارد NFPA 30,14,13,10
o
تمامی استانداردهای NFPA & FM
o
ترجمه استاندارد NFPA 1037
محصوالت
o
اتواسپرینک 2013و 2019به زبان فارسی برای اولین بار در ایران
o
آالرم کد 2019به زبان فارسی برای اولین بار در ایران
o
اطفا حریق آبی
o
پایپنت (ماژول اسپرینکلر)
o
کانتم
دورههای حضوری
o
آموزش اتواسپرینک
o
آموزش آالرمکد
o
آموزش پایروسیم
o
آموزش کانتم +اگزاست
o
آموزش اطفا آبی +پمپ +بازدید از کارگاه
o
آموزش اطفا گازی
o
آموزش اطفا فوم
o
آموزش مبحث سوم مقررات ملی
o
آموزش اعالم حریق F&G
o
آموزش اعالم حریق آدرسپذیر
o
آموزش اعالم حریق متعارف
o
دوره آمادگی آزمون آتشنشانی (برق ،مکانیک ،عمران ،معماری)