Đồ án tốt nghiệp - Design and control of A waste sorting system (metal cans) using PLC IWSM

MINISTRY OF EDUCATION AND TRAINING
HO CHI MINH CITY UNIVERSITY OF TECHNOLOGY AND
EDUCATION
FACULTY OF INTERNATIONAL EDUCATION















GRADUATION THESIS
Topic: DESIGN AND CONTROL OF A WASTE SORTING
SYSTEM (METAL CANS) USING PLC INTEGRATED WITH
SERVO MOTOR
Supervisor: M.Eng. Le Hoang Lam
Students: Nguyen Minh Duy
Nguyen Minh Hoang

20142001
20142210

Major: Electrical and Electronic Engineering Technology

Ho Chi Minh city, July 2025

MINISTRY OF EDUCATION AND TRAINING
HO CHI MINH CITY UNIVERSITY OF TECHNOLOGY AND
EDUCATION
FACULTY OF INTERNATIONAL EDUCATION















GRADUATION THESIS
Topic: DESIGN AND CONTROL OF A WASTE SORTING
SYSTEM (METAL CANS) USING PLC INTEGRATED WITH
SERVO MOTOR
Supervisor: M.Eng. Le Hoang Lam
Students: Nguyen Minh Duy
Nguyen Minh Hoang

20142001
20142210

Major: Electrical and Electronic Engineering Technology

Ho Chi Minh city, July 2025

COMMITMENT
We hereby that this graduation thesis presents the results obtained through
our group’s own research and study, under the guidance of M.Eng. Le Hoang Lam. We
affirm that we have not copied or reproduced the research findings of any other
individuals or organizations. Certain information and materials were referenced and
utilized from published sources, which have been properly cited in the list of references.
We take full responsibility and accept any disciplinary actions in accordance with
regulations should this statement be proven false.

2

ACKNOWLEDGEMENTS
To complete our graduation thesis, we would first like to express our sincere gratitude
to the lecturers of the Faculty of Electrical and Electronic Engineering at Ho Chi Minh
City University of Technology and Education. Throughout our academic journey, they
have provided us with valuable knowledge and d favorable conditions that laid a
solid foundation for us to apply to this project and future work.
We would especially like to extend our heartfelt thanks to our advisor, M.Eng. Le
Hoang Lam, for his dedicated guidance, insightful knowledge, and continuous support
during the process of conducting this thesis.
Due to limitations in time, knowledge, and experience, it is inevitable that our thesis
may contain shortcomings. We sincerely hope to receive constructive feedback and
guidance from the lecturers to further improve our work.
Once again, we would like to express our deep appreciation to everyone around usour families, loved ones, frien
...

...
model responds
quickly and relatively stably, the algorithm can be applied to many products and in many
other problems in industry. Although there are still some shortcomings related to the
mechanical structure, the team has tried to limit it to the lowest level.
Theoretically:
The team had an overall understanding and grasp of the operating principle and
position control theory of servo motors, learned more about the encoder theory, learned
how to communicate between modern devices such as cameras, QD75D4 position
control modules and PLCs. The team understands how to connect, wiring diagrams of
equipment and how to do mechanical processing.
About hardware:
The hardware is relatively rugged, withstanding the pressure when the system
operates at high frequency.
The structure is easy to disassemble, safe for the operator.
The electrical system is neatly connected, safe to use.
About the software:
The program is written in a complete way, easy for the operator.
pycharm software provides an easy working environment, .
The HMI simulation system can display speed and position parameters to help
monitor the operating status of the system more conveniently.
6.2. Development direction
- Enhance the mechanical structure to improve the overall precision of the system.
- Develop the model in a controlled environment where surrounding conditions
remain relatively stable.
- Upgrade the image processing unit to a more advanced processor to enhance the
recognition of complex objects and improve responsiveness to faster-moving items.
- Optimize the system to allow continuous conveyor operation while maintaining
reliable functionality.

76

- Expand object classification capabilities to support sorting of a wider variety of
items.

77

REFERENCES
[1] Mitsubishi Electric (2019), QD75P/QD75D Positioning Module User’s Manual.
[2] Mitsubishi Electric (2006), Mitsubishi Programmable Logic Controller Training
Manual, QD75 Positioning course Q-series.
[3] Mitsubishi Electric (2002), Programable Logic Controller User’s Manual (Melsec
System Q).
[4] Mitsubishi Electric (2014), MR-J3-A Servo Amplifier Instruction Manual.
[5] Mitsubishi Electric (2016), MR-C10-A Servo Amplifier Instruction Manual.
[6] Mitsubishi Electric (2012), Mitsubishi Programmable Controller Training Manual
Q-series basic course (for GX Works2).
[7] MELSEC-Q/L Programming Manual (Common Instruction)
[8] I/O Module Type Building Block Users Manual
[9] DataMan®8050 QuickReferenceGuide

78