Đồ án tốt nghiệp - Design system for controlling and monitoring CO2 concentration in the building

Tên môn học: Khóa luận tốt nghiệp

Giá: 89.000đ

Tổng thanh toán:

89.000đ

Người đăng tải:

#10377

Chi tiết tài liệu :

Đồ án tốt nghiệp ngành Công nghệ Kỹ thuật điện, điện tử - Design system for controlling and monitoring CO2 concentration in the building - Trường Đại học Sư phạm Kỹ thuật Thành phố Hồ Chí Minh (HCMUTE)

Định dạng	PDF
Dung lượng	11.69 MB
Số trang	119
Ngành Ngành học chỉ mang tính chất tham khảo	CNKT điện, điện tử

Lượt xem	286
Ngày đăng	23/01/2026

MINISTRY OF EDUCATION AND TRAINING
HO CHI MINH UNIVERSITY OF TECHNOLOGY AND EDUCATION
FACULTY OF INTERNATIONAL EDUCATION


GRADUATION PROJECT

DESIGN SYSTEM FOR CONTROLLING AND
MONITORING CO2 CONCENTRATION IN THE
BUILDING.
Student’s name:

Student’s ID:

HA GIA HUY

19142098

LAM QUANG BUU 19142087
Major:

ELECTRICAL AND ELECTRONICS
ENGINEERING

Supervisor:

LE TRONG NGHIA, PhD.

Ho Chi Minh, June 2024

1
`

THE SOCIALIST REPUBLIC OF VIETNAM

Independence – Freedom– Happiness

Ho Chi Minh City, June 20, 2024

GRADUATION PROJECT ASSIGNMENT
Student name: Ha Gia Huy

Student ID: 19142098

Student name: Lam Quang Buu

Student ID: 19142076

Major: Electrical and electronics engineering

Class: 1914CLA3

Supervisor: Le Trong Nghia, PhD.

Phone number: _________________

Date of assignment: 24/02/2024

Date of submission: 20/06/2024

1. Project title: Design system for controlling and monitoring CO2 concentration in the bulding.
2. Initial materials provided by supervisor: ___________________________________
3. Content of the project:
-

Design a model to monitor CO2 levels in a building.

-

Design the interface for monitoring and controlling the system.

-

Operating and monitoring the BMS system and assessing the results.

4. Final product:
-

1 project report.

-

1 operational model for controlling CO2 levels.

-

1 interface on the Website platform.
CHAIR OF THE PROGRAM

SUPERVISOR

(Sign with full name)

(Sign with full name)

ii

THE SOCIALIST REPUBLIC OF VIETNAM

Independence – Freedom– Happiness

***

SUPERVISOR’S EVALUATION SHEET
Student name : Ha Gia Huy
Student ID : 19142098
Student name : Lam Quang Buu
Student ID : 19142087
Major: Electrical and Electronics Engineering Technology
Project title: Design system for controlling and monitoring CO2 concentration in the
bulding.
Supervisor: Le Trong Nghia, PhD
EVALUATION
1. Content of the project:
.......................................................................................................................................
.......................................................................................................................................
.......................................................................................................................................
2. Strengths:
.......................................................................................................................................
.............
...

...

Ground wire

DI1, DI2, DI3, DI4

Digital input terminals

VF1

Analog Input 1

FM1

Analog Output 1

TIA, TIB, TIC

Multi-function relay output

99

Appendix 3: Variable Frequency Drive IG5A.

Figure 4: Connection Diagram of IG5A Variable Frequency Drive [8]
100

Features
-

Utilizes sensorless vector control, PID algorithm, and ground fault
protection.

-

Can handle 150% overload for 60 seconds.

-

Manual setup and operation via built-in buttons or control through RS485
communication protocol.

Specifications
Table PL3.1: IG5A Variable Frequency Drive Specifications
Model

SV037iG5A-4

Input voltage

3 phase 380~480V

Output voltage

3 phase 380~480V

Input current

10.5A

Output current

8A

Input frequency

50-60Hz

Output frequency

0.1~400Hz

Device pinout diagram

Figure 5: IG5A Variable Frequency Drive Pinout Diagram
• P1~P8: Multi-function input terminals.
• MO: Multi-function output terminal.
• CM: Common terminal.
• MG: Ground terminal for external power supply.
• 24: External power supply.
• 3A, 3B, 3C: Relay outputs.
• VR: Power supply for external potentiometer.
101

• V1: Voltage input (-12V~+12V).
• I: Current input (0~20mA).
• AM: Analog output signal (Voltage: 11V, Current: 10mA).
• S+, S-: RS485 communication protocol terminals.
Appendix 4: CO2 sensor VELT-W-CO2-I4.
The VELT-W-CO2-I4 CO2 sensor is a type of sensor that measures carbon
dioxide concentration with a 4-20mA output.

Figure 6: VELT-W-CO2-I4 CO2 Sensor [9]
Table PL4.1. Specifications of VELT-W-CO2-I4 CO2 Sensor
Model No.
Detectable gas type
Operating voltage range

VELT-W-CO2-I4
CO2
10 ~ 30 VDC

102

Average current

20mA

Detectable concentration range

0 ~ 5000 ppm

Operating temperature range

-10 ~ 50 C

Operating humidity range

0 ~ 80% RH

Figure 7: Wiring diagram of the CO2 sensor VELT-W-CO2-I4
-

Vin, GND: Supply DC power 10-30V to the CO2 sensor.

-

PWM pin: Outputs PWM signal.

Appendix 6: Hongke 130FLJ5 fan specifications

Figure 8: Hongke 130FLJ5 fan
103

Main specifications of the Hongke 130FLJ5 fan
-

Model: 130FLJ5.

-

Voltage: 220VAC.

-

Current: 0.55A.

-

Frequency: 50Hz.

-

Power: 120W.

-

Speed: 2600RPM.

-

Airflow: 330m3/h.

-

Pressure: 350Pa.

-

Noise level: = 72dB.

Appendix 7: Auramax VP4 fan specifications.

Figure 9: Auramax VP4 Fan.
Main specifications of the Auramax VP4 fanModel: VP4.
-

Model: VP4.

-

Voltage: 220VAC.

-

Frequency: 50Hz.

-

Power: 14W.

-

Airflow: 107m3/h.

-

Noise level: =35dB.

104