Đồ án tốt nghiệp - Tudy of temperature and velocity factors of air flow in clean room using NSS

MINISTRY OF EDUCATION AND TRAINING
HO CHI MINH CITY UNIVERSITY OF TECHNOLOGY AND EDUCATION

GRADUATION THESIS
MAJOR: THERMAL ENGINEERING TECHNOLOGY

STUDY OF TEMPERATUREAND AND VELOCITY FACTORS
OF AIR FLOW IN CLEAN ROOM USING NUMERICAL
SIMULATION SOFTWARE

INSTRUCTOR: DANG HUNG SON
STUDENT:

TO HOANG CHUONG
LAM NHAT DUC

Ho Chi Minh city, July 2025

HCMC UNIVERSITY OF TECHNOLOGY AND EDUCATION

FACULTY OF INTERNATIONAL EDUCATION



UNDERGRADUATE THESIS
MAJOR: THERMAL ENGINEERING TECHNOLOGY

STUDY OF TEMPERATURE AND VELOCITY FACTORS OF
AIR FLOW IN CLEAN ROOM USING NUMERICAL
SIMULATION SOFTWARE

LECTURER: PH.D DANG HUNG SON
MEMBERS:

TO HOANG CHUONG
LAM NHAT DUC

Ho Chi Minh, July 2025

HCMC UNIVERSITY OF TECHNOLOGY AND EDUCATION

FACULTY OF INTERNATIONAL EDUCATION



UNDERGRADUATE THESIS
MAJOR: THERMAL ENGINEERING TECHNOLOGY

STUDY OF TEMPERATURE AND VELOCITY FACTORS OF
AIR FLOW IN CLEAN ROOM USING NUMERICAL
SIMULATION SOFTWARE

LECTURER: PH.D DANG HUNG SON
MEMBERS:

TO HOANG CHUONG

21147102

LAM NHAT DUC

21147108

Ho Chi Minh, July 2025
2

THE SOCIALIST REPUBLIC OF VIETNAM
Independence – Freedom– Happiness



Ho Chi Minh City, July 2025

GRADUATION PROJECT ASSIGNMENT

Student name: To Hoang Chuong

Student ID: 21147102

Student name: Lam Nhat Duc

Student ID: 21147108

Major: Thermal Engineering Technology

Class: 21147FIE1, 21147FIE3

Supervisor: Ph.D Dang Hung Son

Phone number: 0909772349

Date of assignment: _____________________ Date of submission: _____________

1. Project title: Study of temperature and velocity factors of air flow in clean room using numerical
simulation software
2. Initial materials provided by supervisor: ___________________________________
3. Content of the project: _________________________________________________
4. Final product: ________________________________________________________
CHAIR OF THE PROGRAM

SUPERVISOR

(Sign with full name)

(Sign with full name)

3

THE SOCIALIST REPUBLIC OF VIETNAM
Independence – Freedom– Happiness
-

SUPERVISOR’S EVALUATION SHEET
Student name: To Hoang Chuong

Student ID: 21147102

Student name: Lam Nhat Duc

Student ID: 21147108

Major: Thermal Engineering Technology
Project title: Study of temperature and velocity factors of air flow in clean room using numerical
simulation software
Supervisor: Ph.D Dang Hung Son
EVALUATION
1. Content of the project:
..............................................................................
...

...
hrough), End
User (Pharmaceutical, Medical Device, Semiconductor, Hospitals) &amp Region”,
November 2024

[15]

Mordor Intelligence, “Cleanroom Technology Market: Growth, Size, Share, and
Trends”, September 2024

[16]

NASA, “Cleanrooms: Keeping Contaminants Away from Mars, July 2024

[17]

Angstrom Engineering, “Dry rooms for Battery Manufacturing”, June 2025

[18]

European Commission, “The Rules Governing Medicinal Products in the
European , Volume 4, EU Guidelines for Good Manufacturing Practice for
Medicinal Products for Human and Veterinary Use”, August 2022

[19

BS EN ISO 14644-4, “Cleanrooms and associated controlled environments – Part
4: Design, construction and start-up”, 2001

[20]

Nguyễn Quỳnh, Nguyễn Tuấn Hiệp, Trương Hoài Nam, Đồ án tốt nghiệp “Tính
toán, kiểm tra hệ thống điều hòa không khí, thông gió bệnh viện quốc tế Mỹ và
mô phỏng CFD”, August 2022

[21]

Nguyen Tan An, Undergraduate thesis “Optimizing”, February 2023.

[22]

Nguyễn Tiến Đạt, Nguyễn Tiểu San, Lê Thị Tường Vi, Đồ án tốt nghiệp “Nghiên
cứ các điều kiện tiện nghi bằng phương pháp mô phỏng số cho phòng học trường
Đại học Sư phạm Kỹ thuật Thành phố Hồ Chí Minh”, July 2024

[23]

Trần Văn Vũ, Đỗ Nguyễn Quang Hưng, Nguyễn Thế Sơn, Đồ án tốt nghiệp
“Nghiên cứu các điều kiện tiện nghi nhiệt bằng phương pháp mô phỏng số cho
văn phòng nhà máy Dalat Milk tại Lâm Đồng”. January 2024

[24]

BS EN ISO 14644-2, “Cleanrooms and associated controlled environments – Part
2: Specifications for testing and monitoring to prove continued compliance with
ISO 14644-1”, 2000

[25]

W.Whyte, “Cleanroom Technology: Fundamentals of Design, Testing and
Operation”, 2001.

75

[26]

Stephen M.Rothrock, “Semiconductor manufacturing strategy: Where in the
world to locate a fab or cleanroom?”. October 2019

[27]

ViSiTech, “Thiết kế phòng sạch”, May 2025

[28]

Civinco, “Phòng sạch điện tử là gì? Tiêu chuẩn, ứng dụng và quy trình đạt
chuẩn”, June 2025

[29]

BS EN ISO 14644-1, “Cleanrooms and associated controlled environments – Part
1: Classification of air cleanliness”, 1999

[30]

Arup Bhattacharya, Mohamed Saleh Nikoopayan Tak, Shervin Shoai-Naini, Fred
Betz, Ehsan Mousavi, “A Systematic Literature Review of Cleanroom
Ventilation and Air Distribution Systems”, May 2023

[31]

Yifei Luo, Ming Wang, Changjin Wan, Pingqiang Cai, Xian Jun Loh, Xiaodong
Chen, “Devising Materials Manufacturing Toward Lab-to-Fab Translation of
Flexible Electronics”

76

S

K

L

0

0

2

1

5

4